Tell us about your projects. Update us regularly.
-
parkview
- Guru Maker
- Posts: 603
- Joined: Tue Jun 24, 2014 8:25 pm
- Location: Busselton
-
Contact:
Post
by parkview » Tue Feb 08, 2022 1:55 pm
At our December SW Makers meeting someone wanted to use a relay to switch something on/off. Relays are big and bulky and can draw a relatively large current to toggle the armature. It didn't take long to whip up a simple, small (14mm x 23mm) MOSFET switching PCB. This is designed to plug into a breadboard and switch 3V to 5V through to 12V loads with up to an amp of current, although I think you would struggle to put an amp through a breadboard connection
![3V-5V MOSFET Switch.jpg](./download/file.php?id=927&sid=6904a2964c5c244999b00e6a4c88c837)
- 3V-5V MOSFET Switch.jpg (66.59 KiB) Viewed 7860 times
It comes with a Picoblade male connector soldered in place and a 2-pin 0.1" pinheader can be soldered on as well. The switch connector has a diode across it to help prevent back-EMF if it's switching a small motor or inductive load.