Light Burn Camera alignment

Tell us about your projects. Update us regularly.
Post Reply
User avatar
seaton
Master Maker
Posts: 222
Joined: Tue Jun 24, 2014 11:41 am
Location: Bunbury, WA
Contact:

Light Burn Camera alignment

Post by seaton » Wed Aug 01, 2018 4:57 pm

Last week I was playing with the lightburn camera vision for work alignment.

I was using some masking tape to protect from any burn marks, which peels off leaving a nice clean surface

I was engraving some wooden coat hangers for my wifes business and the finished product

BTW The cut was not done at the settings you see on the screen level as was changed after I did the screen shot, that was my default 3mm mdf cut through

Cut/Etch circle 200mm/Sec @ 15%
Scan 200mm/Sec @ 15%


2018-07-29_20-29-40.png
2018-07-29_20-29-40.png (969.47 KiB) Viewed 5925 times

IMG_0921.JPG
IMG_0921.JPG (1.97 MiB) Viewed 5925 times

User avatar
Jubbp
Master Maker
Posts: 209
Joined: Sun Jun 22, 2014 8:15 pm
Location: Bunbury WA
Contact:

Re: Light Burn Camera alignment

Post by Jubbp » Wed Aug 22, 2018 9:42 am

Looks really cool Steve. Was Jo happy with it?

User avatar
seaton
Master Maker
Posts: 222
Joined: Tue Jun 24, 2014 11:41 am
Location: Bunbury, WA
Contact:

Re: Light Burn Camera alignment

Post by seaton » Mon Mar 11, 2019 2:17 pm

definitely :D

Post Reply