Playing Around with LEDs and Clothing Toggles

Tell us about your projects. Update us regularly.
Post Reply
Guru Maker
Posts: 522
Joined: Tue Jun 24, 2014 8:25 pm
Location: Busselton

Playing Around with LEDs and Clothing Toggles

Post by parkview » Sat Jan 04, 2020 2:53 pm

Back in 2017 a group of us where touring the fairy land of the Shaibu Fabric Markets in Shenzhen (Take Exit C at the Shaibu Station):
fabric_buildings.jpg (59.94 KiB) Viewed 2946 times
One building has a few floors that are a wonderland of fabric bling:
Shaibu_Markets1.jpg (71.78 KiB) Viewed 2946 times
Shaibu2.jpg (60.49 KiB) Viewed 2946 times
Shaibu3.jpg (92.38 KiB) Viewed 2946 times
shaibu4.jpg (52.26 KiB) Viewed 2946 times

I came across some clothing toggles. The kind that can be found on warm winter jackets:
toggles.jpg (88.21 KiB) Viewed 2946 times
I thought one day they might make great dragons teeth - glow in the dark kind of things, or who knows what. They where large enough to mount a 5050 white or RGB LED in the base of them.

When I was back in Australia, I quickly made a few home made PCB's for the white LED and RGB LEDs:
IMG_E8682.JPG (297.41 KiB) Viewed 2946 times
I had a play with them, but found the LED light wouldn't get past the first toggle hole, so I drilled a hole for the 5050 LED and then in the middle of that, a hole for some 2.5mm side lit optical fiber:
drilling-toggle.jpg (41.05 KiB) Viewed 2946 times

This kind of evenly lit the whole plastic toggle up:
dragons teeth.2.jpg
dragons teeth.2.jpg (60.24 KiB) Viewed 2946 times
Diane was making some tiny quilt hexagon quilt blocks (with hand micro stitching) so we positioned one in the center to see how it would look:
cool2.jpg (75.05 KiB) Viewed 2946 times

I ended up getting some PCB's made up for the LEDs. These have 2mm corner holes to make them easier to sew down onto fabric:
IMG_E8684.JPG (31.66 KiB) Viewed 2946 times

Post Reply