Hi All,
Ive just replaced the motor on my spindle to get get more RPM, before I was getting around 10,000RPM, for drilling PCB with the small drills is not really enough, increasing th spindle speed will also allow me to increase my feeds. So I swapped out the motor with a brushless 3650-2050KV motor, capable of 48,000KRPM @ 24V, I'm running at 12V and with current current pully arrangement will get to that RPM, however from initial tests I think 30,000 rpm is the safe limit, if I go over the drive belts start doing some strange things as you can see in the video below
https://youtu.be/W8qtx5AL1wc
Stephen...
CNC Spindle Update
CNC Spindle Update
BLOG: https://my.makeraddiction.com/
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67