found this page while looking around tonight.
Turn your Felix (and others) into a laser cutter.
http://jtechphotonics.com/?page_id=333
Might be interested in this in the near future...
Sometimes adative is not enough,
Re: Sometimes adative is not enough,
Jubbp wrote:found this page while looking around tonight.
Turn your Felix (and others) into a laser cutter.
http://jtechphotonics.com/?page_id=333
Might be interested in this in the near future...
Yes its the same laser head I have, I thought I bought it in and showed everyone at one of the meetings
BLOG: https://my.makeraddiction.com/
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67
Re: Sometimes adative is not enough,
I thought I bought it in and showed everyone
Yes, you did bring it in, (It was just the three of us that day though) Is it the same unit including the driver etc? Same supplier or did you find a better(cheaper) one?
Moved anywhere towards getting it going?
Re: Sometimes adative is not enough,
Jubbp wrote:I thought I bought it in and showed everyone
Yes, you did bring it in, (It was just the three of us that day though) Is it the same unit including the driver etc? Same supplier or did you find a better(cheaper) one?
Moved anywhere towards getting it going?
It's the same one.
Yes I have made a carriage, but have come up with a different head design based on a kickstart project I backed, https://www.kickstarter.com/projects/1537608281/lazerblade-the-affordable-laser-cutter-engraver, where it also protects the end users eyes, as the original was open and its VERY bright, not to mention possible reflection from the print bed, so not very safe.
http://forum.felixprinters.com/viewtopi ... aser#p3101
BLOG: https://my.makeraddiction.com/
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67
Re: Sometimes adative is not enough,
Actually it looks like he now has a 2.8W head, mine is 1.7W, same driver board though.
BLOG: https://my.makeraddiction.com/
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67
Re: Sometimes adative is not enough,
WOW!! Like the Darkly Labs kit. Will need to look into this one before moding the Felix.
Looks like it's actually happening too. Pitty I missed backing this one.
Looks like it's actually happening too. Pitty I missed backing this one.
Re: Sometimes adative is not enough,
Jubbp wrote:WOW!! Like the Darkly Labs kit. Will need to look into this one before moding the Felix.
Looks like it's actually happening too. Pitty I missed backing this one.
Yes I should be receiving mine in November so will bring it in.
BLOG: https://my.makeraddiction.com/
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67