Felix Firmware upgrade

Post Reply
User avatar
Jubbp
Master Maker
Posts: 209
Joined: Sun Jun 22, 2014 8:15 pm
Location: Bunbury WA
Contact:

Felix Firmware upgrade

Post by Jubbp » Sun Oct 21, 2018 2:08 pm

Anyone updated the firmware on their Felix 3D Printer.

Trying out Octoprint and it says I should update the firmware..

parkview
Guru Maker
Posts: 603
Joined: Tue Jun 24, 2014 8:25 pm
Location: Busselton
Contact:

Re: Felix Firmware upgrade

Post by parkview » Sun Oct 21, 2018 5:28 pm

I haven't upgraded for many years. Maybe when I did the 3.0 to 3.1 upgrade?

User avatar
Jubbp
Master Maker
Posts: 209
Joined: Sun Jun 22, 2014 8:15 pm
Location: Bunbury WA
Contact:

Re: Felix Firmware upgrade

Post by Jubbp » Thu Oct 25, 2018 7:19 pm

So I haven't updated the firmware as yet. I've got a couple of prints to go before I can risk putting it out of action.

But tonight I learnt something.

I have forever had problems with my printer "clicking" while printer and I thought I'd make an adjustment to the extruder feed gear and use a different part of the roller. This required I removed the filament and adjust the gear. While doing this I looked at the filament what was removed from the hotend and noticed that it appeared to be deformed. ie. The roller holding it to the gear may be too close. snd msybe it was having trouble transiting the hot end

I backed off the adjustment screw and restarted the print.

Touchwood. No clicking on this print.

Just goes to show that tough and tight may not always be the answer. Its all about the "feels" :) :)

User avatar
seaton
Master Maker
Posts: 222
Joined: Tue Jun 24, 2014 11:41 am
Location: Bunbury, WA
Contact:

Re: Felix Firmware upgrade

Post by seaton » Mon Mar 11, 2019 2:26 pm

Jubbp wrote:
Sun Oct 21, 2018 2:08 pm
Anyone updated the firmware on their Felix 3D Printer.

Trying out Octoprint and it says I should update the firmware..
Yes its not that hard, here is my repo of repieter code with my changes, although I haven't updated for quite a while and will be one of the first jobs when I get into my man cave

https://github.com/madeinoz67/Repetier_ ... Single_GT2

Post Reply