Hi,
Whilst rummaging through my massive parts dumpster I came across my first FPGA experimenters board. It is only a Cyclone 1C6 (need Quartus ~ v9.0) which I do not wish to downgrade nor have a furthur use for this board. It still works as have just tested it with it's test program
I am willing to give this board away (It only cost me $80 a few years ago) - Just a genuine interest in FPGAs
It contains:
16x2 Backlit Blue LCD Hitachi interface
VGA Output (R3,G3,B2)
CY7C1019CV33 1Mbit SRAM (128kB x 8 organisation)
8 digit 7seg display
4 pushbuttons
8 LEDs
2x PS2 ports
1x RS232 Serial Port
USB or DC jack powered
Need JTAG programmer to program. I haven't a spare one on hand but they're less than AUD$10
If anyone (local) is interested in starting out with FPGAs, this is a cheap easy way to start. I have all documents and Quartus II Web edition can be downloaded free (<v9 I think is needed to support Cyclone I chips)
Altera Cyclone I 1C6 FPGA board giveaway
Altera Cyclone I 1C6 FPGA board giveaway
Last edited by shanevi on Sun Aug 03, 2014 4:48 pm, edited 1 time in total.
Shane van Ingen
http://phoenixtech.no-ip.org/
http://phoenixtech.no-ip.org/
Re: Altera Cyclone I 1C6 FPGA board giveaway
Love too....but I don't currently have enough time in the day for all my projects but I'm sure someone will put it to good use
BLOG: https://my.makeraddiction.com/
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67
Re: Altera Cyclone I 1C6 FPGA board giveaway
Maybe you could hold onto it for a little while. As re get a little bigger, there may be somone who is interested.
Maybe it could go into the groups stock of toys for the future. (not that we have one yet, this could be the first donation.... ) It might be good to have one around when you're giving us a demonstration, maybe someone might like to give it a go.
Maybe it could go into the groups stock of toys for the future. (not that we have one yet, this could be the first donation.... ) It might be good to have one around when you're giving us a demonstration, maybe someone might like to give it a go.
Re: Altera Cyclone I 1C6 FPGA board giveaway
Jubbp wrote:Maybe you could hold onto it for a little while. As re get a little bigger, there may be somone who is interested.
Maybe it could go into the groups stock of toys for the future. (not that we have one yet, this could be the first donation.... ) It might be good to have one around when you're giving us a demonstration, maybe someone might like to give it a go.
Yes good Idea as I have a few boards here that people can use as well, a hardware library so to speak.
Last edited by seaton on Mon Aug 11, 2014 9:24 am, edited 1 time in total.
BLOG: https://my.makeraddiction.com/
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67
Thingiverse: https://www.thingiverse.com/seaton/
Github: https://github.com/madeinoz67
Re: Altera Cyclone I 1C6 FPGA board giveaway
Once I sort out my own junk from the boot of my old car, I'm sure I'll find some more "Good Junk.
Shane van Ingen
http://phoenixtech.no-ip.org/
http://phoenixtech.no-ip.org/
Re: Altera Cyclone I 1C6 FPGA board giveaway
What do you use it for and how?
I know everything about nothing.