Page 1 of 1

Perth Curtin University Robofair 2015

Posted: Wed Aug 19, 2015 10:27 pm
by parkview
Hi, it's on again:

Event: Robofair 2015
Date: Sunday 6th of December 2015
Time: 10 am – 2 pm
Location: Engineering Pavilion (Building 215)
Curtin University
Kent Street, Bentley


Same place, same time, in Dec. instead of November, so it could be a bit warmer.

PM me, or email me if your interested in attending. If you haven't been before, I recommend a visit. Lots of robotics, drones, Lego robotics and science things.

Re: Perth Curtin University Robofair 2015

Posted: Fri Aug 28, 2015 7:31 pm
by parkview
2 x tables booked for 4 people, so we have half a table each.

Artifactory, West Coast Makers and Enkel will now all be attending as well. It should be an interesting room!

Re: Perth Curtin University Robofair 2015

Posted: Fri Nov 06, 2015 4:44 pm
by BeJay
I might not be able to make it this year :(

I have to do a bit of FIFO for work, so I will let you guys know a bit closer to the date, but at this stage it overlaps :?

Cheers

Bj

Re: Perth Curtin University Robofair 2015

Posted: Sat Nov 07, 2015 6:17 am
by seaton
Bugger!

Re: Perth Curtin University Robofair 2015

Posted: Fri Nov 27, 2015 7:18 am
by BeJay
Ok, looks like I 'm going to be back by Sunday now, so what is the plan of attack with this year?

I don't have much new stuff to show, as the XYZCarve I made i too big to fit in the car! I did make a plywood case for my Pi powered SDR, but it's not finished yet. I can bring it anyway. I was hoping to make some more kid interactive things, but I just haven't found the time since last year.... crickey!

Re: Perth Curtin University Robofair 2015

Posted: Fri Nov 27, 2015 7:26 am
by parkview
I hope to be there at around 08:00 - to claim the space. We should have half a table each and a pin up board (unverified). See last nights email with PDF attachment that shows the floor plan.

I don't think it matters what you bring. With 2000 odd people walking past, there will be someone that's interested in what you have. This year I am targeting other Makers, not the kids.

Re: Perth Curtin University Robofair 2015

Posted: Tue Dec 01, 2015 5:06 pm
by BeJay
I was going to cut a sign tomorrow for robofair, and was wondering if you guys have a decided logo and a vectorised SVG of it I can cut?!

Re: Perth Curtin University Robofair 2015

Posted: Wed Dec 02, 2015 9:25 am
by Jubbp
Thanks Bejay,

but we haven;t really decided on the logo as yet :oops: . Maybe something we should finally get done soon. :o

Re: Perth Curtin University Robofair 2015

Posted: Wed Dec 02, 2015 9:39 am
by Jubbp
Having said that, This is what I do have.

https://dl.dropboxusercontent.com/u/221 ... dalion.svg

See if you can use that.

Re: Perth Curtin University Robofair 2015

Posted: Wed Dec 02, 2015 9:41 am
by BeJay
I'll give it a go!

edit: Here it is...

Image

It's 300 x 300mm so not too bad. Should have used MDF for it's forgiveness, but thought I'd wing it with ply from Bunnings ;)

Re: Perth Curtin University Robofair 2015

Posted: Sun Dec 06, 2015 6:05 pm
by BeJay
Great to get together as always guys! Here is my timelapse and a few pics ;)

https://www.youtube.com/watch?v=o_eA9lFKe6A

Image

Image

Image

Image

Image

Image

Re: Perth Curtin University Robofair 2015

Posted: Sun Dec 06, 2015 10:00 pm
by parkview
Yes, it was a great event. There are some interesting people out there.

printing.jpg
printing.jpg (60.41 KiB) Viewed 17279 times


laser cut arms.jpg
laser cut arms.jpg (62.03 KiB) Viewed 17279 times


computer vision.jpg
computer vision.jpg (29.67 KiB) Viewed 17279 times

Re: Perth Curtin University Robofair 2015

Posted: Sun Dec 06, 2015 10:01 pm
by parkview
and a few more:

watercolorbot.jpg
watercolorbot.jpg (31.8 KiB) Viewed 17279 times


setting up.jpg
setting up.jpg (57.35 KiB) Viewed 17279 times