Page 1 of 1
Switched PSU
Posted: Fri Aug 01, 2014 11:02 pm
by parkview
Hi Stephen,
you mentioned off-line the other day about a simple switched mode PSU. Can you link in the chip and circuit diagram that your using?
Thanks.
Re: Switched PSU
Posted: Sat Aug 02, 2014 2:55 pm
by seaton
Its a dual voltage Lipo BuckBoost DCDC regulator with charger and battery management for a retrofit to the Rallylog I did a couple if years back for the bike club as the 9v battery and LDO regulators doesn't really cut the mustard over a two day event.
3.3v is LTC3531 buckboost regulator
5V is MCP1640 boost regulator
circuit attached, still doing the PCB side of things.
- STR-13-002-2.png (717.17 KiB) Viewed 8493 times
Re: Switched PSU
Posted: Tue Aug 05, 2014 10:16 pm
by BeJay
What are you using for drawing your schematic? Looks almost KiCAD, but cant really tell it from Eagle?
Cheers
Bj
Re: Switched PSU
Posted: Mon Aug 11, 2014 9:25 am
by seaton
BeJay wrote:What are you using for drawing your schematic? Looks almost KiCAD, but cant really tell it from Eagle?
Cheers
Bj
Yes is KiCad
Been using for a few years now and love it.