Oscilloscopes

A place to review products you've used so other can gain from your experience.
Post Reply
parkview
Guru Maker
Posts: 603
Joined: Tue Jun 24, 2014 8:25 pm
Location: Busselton
Contact:

Oscilloscopes

Post by parkview » Sat Jul 26, 2014 9:52 pm

I have a largish 100MHz Tectronics 465B o'scope which I picked up at an auction for $100 back in 1990 when I worked in San Jose, California. It's my pride and joy as I use to use them a lot back in the '70's and '80's when I was in the Navy. However, it does take up a lot of desk real-estate, so I don't drag it out unless I really need too.

Earlier this year, Bitscope released a USB based DSO that you could run off a Raspberry Pi, MAC or a PC: http://www.bitscope.com/product/BS05/ Awesome, so a few weeks later it lobbed onto my desk for a play.

First thing, it's a tiny 20mm wide x 110mm long bare board that has been shrink wrapped in clear plastic. It takes a bit of getting use to and to gain confidence that it's reporting correctly what it should be.

I used it last night to monitor the noise on the Z-axis of my 3D printer:
BitScope_2.jpg
BitScope_2.jpg (42.34 KiB) Viewed 9168 times


The leads are of the grab claw type. Here I have them grabbing onto the bolt slot:
BitScope_3.jpg
BitScope_3.jpg (43.01 KiB) Viewed 9168 times


Here is an action screen shots of the software working on my PC:
BitScope_1.jpg
BitScope_1.jpg (80.43 KiB) Viewed 9168 times


I would recommend it if your in need of a cheep-ish o'scope.

User avatar
Jubbp
Master Maker
Posts: 209
Joined: Sun Jun 22, 2014 8:15 pm
Location: Bunbury WA
Contact:

Re: Oscilloscopes

Post by Jubbp » Mon Jul 28, 2014 2:37 pm

Thanks Paul,

I've always wanted a o'scope, thought they were cool but have never known how they are used. Maybe a lesson at a meeting some time.

PJ

parkview
Guru Maker
Posts: 603
Joined: Tue Jun 24, 2014 8:25 pm
Location: Busselton
Contact:

Re: Oscilloscopes

Post by parkview » Mon Jul 28, 2014 7:46 pm

love too. They are a handy tool to have around, as they let you see into the 'black box'.

Cheers,

Paul

User avatar
BeJay
Maker
Posts: 139
Joined: Mon Jun 23, 2014 6:31 pm
Location: Perth
Contact:

Re: Oscilloscopes

Post by BeJay » Mon Jul 28, 2014 9:43 pm

That looks pretty good for what it is. I have a hacked RIGOL DS1052E 50Mhz DSO that I software hacked to 100Mhz using Dave's video: https://www.youtube.com/watch?v=LnhXfVYWYXE

It does everything I've needed so far, but it would be nice to have a USB scope, so I will be sure to check it out!

Cheers

BeJay

parkview
Guru Maker
Posts: 603
Joined: Tue Jun 24, 2014 8:25 pm
Location: Busselton
Contact:

Re: Oscilloscopes

Post by parkview » Sat Sep 19, 2015 7:02 pm

Talking of Oscilloscopes, for the August 2015 meeting, I brought along two old beasts.

1) a 1960's valve based Tektronix 503. We used these in the Navy Electronics training school. I had tried flashing it up before the meeting, but as I had suspected, with it sitting in storage for the last 24 years since I had last used the 10MHz 'scope, time had not been kind to it. The valves lit up, but straight way I could hear the old capacitors crackling away and then the electrons escaped in a soft cloud of smoke:

Tektronics 503.jpg
Tektronics 503.jpg (48.9 KiB) Viewed 9154 times


Luckily I have two of these and the original repair manual. One day I might get around to replacing the capacitors.

2) Next to it is a 100MHz 1970's vintage all transistorised Tektronix 465B. I was presently surprised to see that it still works:
Tektronics 465B.jpg
Tektronics 465B.jpg (196.55 KiB) Viewed 9154 times

Post Reply